HledejSoučástky.cz


Nalezených součástek: 41       Optimalizace nákupu
Součástka:
Řadit:
Obrázek Název Cena
s DPH
Sklad Obchod Sklad.č. Detail dostupnost Slevy
Optimalizace:
Popis
MW-EB1 MIKROVLNNÝ SENZOR 553,00 Kč Skladem PSE 3000-227
1 ks 553,00 Kč
Mikrovlnný senzor pohybu., High-precision microwave motion sensor, LED ready, High-precision microwave motion sensor for mounting inside lamp housings., HF system 5,8 GHz, CW Radar, ISM LED and also for other illuminant but only with base load., protection class: 20 IP, lenght: 11,48 cm, width: 11,48 cm, height: 5,48 cm, input voltage: 220-240 V AC, height: 45 mm, protection: 2, length: 93 mm, width: 47 mm, power source: 220 - 240 V AC, detection range: 360 °, luminous sensitivity adjustable: 3 - 2000 Lux, switching-off delay adjustable: 10 Sec. - 12 min., switch contact: relay 300 W, switching capacity CFL: 300 W, switching capacity LED: 300 W, switching capacity filament bulb: 1200 W, installation height: 1.5 - 3.5 m, motions identification up to: 1 - 8 m, power consumption stand-by: 0,6 W, rated power: 1,5 W, minimum load: 1 W, color: white
MW-IDA MIKROVLNNÝ SENZOR 604,00 Kč Skladem PSE 3000-228
1 ks 604,00 Kč
Mikrovlnný senzor pohybu pro montáž na strop, nebo na stěnu., Microwave motion sensor surface mount, High-precision microwave motion sensor, LED ready, High-precision microwave motion sensor for indoor on-wall mounting., LED and also for other illuminant but only with base load., HF system 5,8 GHz, CW Radar, ISM band, protection class: 20 IP, lenght: 11,48 cm, width: 11,48 cm, height: 5,48 cm, input voltage: 230 V AC, height: 44 mm, diameter: 103 mm, protection: 2, Language of the manual: german/english, power source: 220 - 240 V AC, detection range: 360 °, luminous sensitivity adjustable: 3 - 2000 Lux, switching-off delay adjustable: 10 sec. - 12min., switch contact: relay 300 W, switching capacity CFL: 300 W, switching capacity LED: 300 W, switching capacity filament bulb: 1200 W, installation height: 1.5 - 3.5 m, motions identification up to: 1 - 8 m, power consumption stand-by: 0,6 W, rated power: 1,4 W, minimum load: 1 W, color: white
MFJ-969 Anténní tuner - roller, 300W, 160m - 6m 7,00 Kč Nejsou GES 08901033
TUNER, HF+6M, 300W, ROLLER, DL, XMTR, ANT SW.
MFJ-989D 1500 Watt Anténní tuner - roller, 160-10m 14,00 Kč Nejsou GES 08901040
1500 Watt Anténní tuner 1.8 až 30 MHz
MFJ-4225MV Spínaný zdroj 85-135/170-260VAC, 9-15VDC/25Amax/22Atrv.; Nemá CE certifikaci 3,00 Kč Nejsou GES 08900716
Spínaný zdroj 85-135/170-260VAC, 9-15VDC/25Amax/22Atrv.; Nemá certifikaci pro použití na území EU
MFJ-4245MV Spínaný zdroj 85-135/170-260VAC, 9-15VDC/45Amax/40Atrvale; Nemá CE certifikaci 5,00 Kč Nejsou GES 08900719
Spínaný zdroj 85-135/170-260VAC, 9-15VDC/45Amax/40Atrvale; Nemá certifikaci pro použití na území EU.
ALS-500MXCE 36,00 Kč Nejsou GES 08900303
Polovodičový PA 500Wout (70Win); 13.6VDC / 80A; 4kg; 9,5x22,9x39,4cm; 160-10m
ALS-500MRXCE 37,00 Kč Nejsou GES 08901827
Polovodičový PA 500Wout (70Win); 13.6VDC/80A; 9,5x22,9x39,4cm; 160-10m+dálk.ovládání
AL-572XCE 63,00 Kč Nejsou GES 08900310
PA 1.3kW SSB PEP (1kW CW)/75Win; osazeno 4x 572B; 160-10m; 230VAC
AL-572XQ 72,00 Kč Nejsou GES 08901167
PA 1.3kW SSB PEP (1kW CW)/75Win; 4x 572B; 160-10m; QSK; 230VAC
AL-82XCE ELEKTRONKOVÝ PA 1500W 160-10M 99,00 Kč Nejsou GES 08900315
PA >1.5kW CW,RTTY (>1.8kW PEP)/100Win; 2x 3-500Z; 160-10m; 230VAC
AL-82XQCE ELEKTRONKOVÝ PA 1500W 160-10M 114,00 Kč Nejsou GES 08900316
PA >1.5kW CW,RTTY (>1.8kW PEP) / 100Win; 2x 3-500Z; 160-10m; QSK-5PC; 230V
AL-80BXCE 55,00 Kč Nejsou GES 08900306
PA >1kW SSB PEP(800W CW)/85Win; osazeno 3-500; 160-10m; 230VAC
AL-80BXQCE 65,00 Kč Nejsou GES 08900307
PA >1kW SSB PEP(800W CW)/85Win; osaz. 3-500; QSK-5PC; 160-10m; 230VAC
AL-800XCE 85,00 Kč Nejsou GES 08900308
PA >1.25kW SSB PEP (1kW CW) / 70Win; osaz.3CX800A7; 160-10m; 230VAC
AL-800HXCE 129,00 Kč Nejsou GES 08900309
PA >1.5kW CW,SSB PEP/55Win; 2x 3CX800A7; 160-10m; QSK-5PC; 230VAC
MFJ-986 ANTÉNNÍ TUNER- ROLER 12,00 Kč Nejsou GES 08901073
Anténní T-tuner s diferenciálním kondenzátorem, roller, 1.5kW SSB PEP,1.8-30MHz
MFJ-1025 6,00 Kč Nejsou GES 08901078
1.5-30MHz Noise Canceller (odstraňovač šumu)
MFJ-1026 Noise Canceller 7,00 Kč Nejsou GES 08901079
1.5-30MHz Noise Canceller (odstraňovač šumu)
MFJ-1775 MULTIBAND ANTÉNA OTOČNÝ DIPÓL 10,00 Kč Nejsou GES 08901809
Půlvlnný 6ti pásmový otočný mini dipól 40/20/15/10/6/2m; l=4,2m; 1,5kW CW/SSB
MFJ-998 AUTOMATICKÝ ANTÉNNÍ TUNER 1,8-30MHz / 1500W SSB/CW 23,00 Kč Nejsou GES 08902184
Automatický tuner 1.8-30MHz; 1500W SSB/CW
AV-680 MULTIBAND VERTIKÁLNÍ ANTÉNA 9-PÁSEM (6, 10, 12, 15, 17, 20, 30, 40, 80m) 17,00 Kč Nejsou GES 08902224
HY-GAIN 9ti pásmový vertikál 6/10/12/15/17/20/30/40/80m; 1500W PEP; 8.1m; 12kg
MFJ-4275MVX Spínaný zdroj 100-120/220-240VAC, 13,8VDC/75Amax/70Atrvale; Nemá CE certifikaci 9,00 Kč Nejsou GES 08902308
Spínaný zdroj 100-120/220-240VAC 13,8VDC/75Amax/70Atrvale; Nemá certifikaci pro použití na území EU.
3D PERO-4 900,00 Kč Nejsou PSE 5210-6014
1 ks 900,00 Kč
3D PRINTING PEN WITH STAND, Features, can be powered with a power bank of min. 2 A (optional) or via USB adapter (optional), load/unload button to fill and remove filament automatically, filament will be reversed out automatically if the pen is idle for 2 min., speed control button : fast - normal - slow, super slim design, with stand, USB cable included, filament switch with type indicator ABS / PLA, Specifications, input voltage: 5 VDC 2 A 10 W (USB cable), power supply: AC/DC adapter or power bank (not incl.), pen material: plastic, nozzle: 0.7 mm diameter ceramic, printing material: 1.5-1.75 mm ABS/PLA filament, print range: unlimited, molding speed: adjustable, filament temperature: ABS 210 °C - PLA 190 °C, dimensions: 150 x 38 x 23 mm, pen net weight: 50 g, discharging mode: hot melt extrusion molding, molding: three-dimensional molding, filament diameter: 1.75 mm
DETEKTOR POHYBU PIR105 340,00 Kč Nejsou PSE 3000-0133
1 ks 340,00 Kč
Features, easy to install and to use, detects day and night automatically, time delay, indoor use, Specifications, power supply: 220-240 VAC 50 Hz, detection range: 6 m max., detection angle: 360°, ambient light:, installation height: 2.2 - 4 m, power consumption: 0.5 W, motion speed detection: 0.6 - 1.5 m/s, working temperature:, working humidity:, max. rated load:, resisitve: 1200 W (230 VAC), inductive: 300 W (230 VAC), IP rating: IP44, switch type: relay, relay output: normally open (N.O.), switch-off delay: ± 10 seconds to ± 15 minutes, dimensions: průměr 88 x 46 mm, weight: 110 g
DETEKTOR POHYBU PIR1300 249,00 Kč Nejsou PSE 3000-0134
1 ks 249,00 Kč
Features, easy to install and to use, detects day and night automatically, adjustable detection area: down/up, left/right, adjustable activation duration, Specifications, power supply: 220-240 VAC, 50 Hz, 6 A max., detection range: 5 - 12 m max., detection angle: 180°, ambient light:, installation height: 1.8 - 2.5 m, power consumption: approx. 0.5 W, motion speed detection: 0.6 - 1.5 m/s, working temperature: -20 °C to + 40 °C, working humidity:, max. rated load:, resisitve: 1200 W (230 VAC), inductive: 300 W (230 VAC), IP rating: IP44, switch type: relay, relay output: normally open (N.O.), switch-off delay: ± 10 seconds to ± 7 minutes
CHLSC3 MINI LED DIMMER 208,00 Kč Nejsou PSE 5503-445
1 ks 208,00 Kč
MINI LED DIMMER, Features, ideal for use with single colour LED strips. See our website., 3 functions:, switching: on-off, dimming: 9 levels, built-in stand-alone programs: fade and flashing animations, memory function: the device remembers the last used function on power loss. On power restore, the last used function is automatically activated., use only with a power supply of max. 60 W / 12 V or 120 W / 24 V, Specifications, power supply: 5 - 24 VDC, maximum load: 5 A, PWM frequency: ± 125 Hz, dimensions: 40 x 13 x 8 mm, cable length: 2 x 50 cm, weight: 15 g, caution: output current of power supply must not exceed 5 A. Suitable power supplies: 60 W / 12 V or 120 W / 24 V.
CHLSC4 MINI RGB CONTROLLER 235,00 Kč Nejsou PSE 5503-446
1 ks 235,00 Kč
MINI RGB CONTROLLER, Features, ideal for use with RGB LED strips. See our website., 4 functions:, switching: on-off, dimming: 5 levels, built-in stand-alone programs: fade and flashing animations, colour selection: 20 colours, memory function: the device remembers the last used function on power loss. On power restore, the last used function is automatically activated., use only with a power supply of max. 60 W / 12 V or 120 W / 24 V, Specifications, power supply: 5 - 24 VDC, maximum load: 3 x 2 A, PWM frequency: ± 125 Hz, dimensions: 40 x 13 x 8 mm, cable length: 2 x 50 cm, weight: 10 g, caution: output current of power supply must not exceed 5 A. Suitable power supplies: 60 W / 12 V or 120 W / 24 V.
LEDC01 TOUCH LED DIMMER 482,00 Kč Nejsou PSE 5503-449
1 ks 482,00 Kč
TOUCH LED DIMMER, This touch LED dimmer is based on the capacitive touch technique., Touch the metal body with your finger for switching and dimming., Features, ideal for use with single colour LED strips. See our website, double function:, switching: short touch (on-off), dimming: long touch (increase-decrease), use only with a power supply of max. 30 W / 12 V or 60 W / 24 V, Specifications, power supply: 12 - 24 VDC, maximum load: 2.5 A, PWM frequency: ± 200 Hz, dimensions: 31 x 38 x 9 mm, weight: 22 g, caution: output current of power supply must not exceed 2.5 A. Suitable power supplies: 30 W / 12 V or 60 W / 24 V.
LEDC02 INFRARED SENSOR SWITCH.. 358,00 Kč Nejsou PSE 5503-450
1 ks 358,00 Kč
INFRARED SENSOR SWITCH FOR LED STRIPS, Mount the infrared sensor on the inside of a cabinet., Open the door to activate the infrared sensor switch., Features, ideal for use with single colour LED strips. See our website, Specifications, power supply: 12 - 24 VDC, maximum load: 2.5 A, dimensions: 31 x 38 x 9 mm, weight: 22 g, caution: output current of power supply must not exceed 2.5 A. Suitable power supplies: 30 W / 12 V or 60 W / 24 V.
LEDC04 MINI LED DIMMER 293,00 Kč Nejsou PSE 5503-452
1 ks 293,00 Kč
MINI LED DIMMER, Features, ideal for use with single colour LED strips. See our website, 3 functions:, switching: on-off, dimming: 9 levels, built-in stand-alone programs: fade and flashing animations, memory function: the device remembers the last used function on power loss. On power restore, the last used function is automatically activated., use only with a power supply of max. 60 W / 12 V or 120 W / 24 V, Specifications, power supply: 12 - 24 VDC, maximum load: 5 A, PWM frequency: ± 125 Hz, dimensions: 310 x 13 x 8 mm, weight: 15 g, caution: output current of power supply must not exceed 5 A. Suitable power supplies: 60 W / 12 V or 120 W / 24 V.
LEDC11 TOUCH MULTI-FUNCTION LE.. 1573,00 Kč Nejsou PSE 5503-458
1 ks 1573,00 Kč
TOUCH MULTI-FUNCTION LED CONTROLLER/DIMMER, Features, ideal for use with LED strips. See our website., 4 functions:, switching: on-off, dimming: up-down, built-in stand-alone programs: fading and flashing RGB animations, RGB colour selection: 7 colours, use only with a power supply of max. 144 W / 12 V or 288 W / 24 V, Specifications, power supply: 12 - 24 VDC, maximum load: 3 x 4 A, PWM frequency: ± 900 Hz, external dimensions: 86 x 86 x 13 mm, internal dimensions: 57 x 65 x 24 mm, weight: 150 g, caution: output current of power supply must not exceed 3 x 4 A. Suitable power supplies: 144 W / 12 V or 288 W / 24 V.
LEDC12 TOUCH MULTI-FUNCTION LE.. 1673,00 Kč Nejsou PSE 5503-459
1 ks 1673,00 Kč
TOUCH MULTI-FUNCTION LED CONTROLLER/DIMMER, Features, ideal for use with LED strips. See our website., 4 functions:, switching: on-off, dimming: up-down, built-in stand-alone programs: fading and flashing RGB animations, RGB colour selection: 7 colours, use only with a power supply of max. 144 W / 12 V or 288 W / 24 V, Specifications, power supply: 12 - 24 VDC, maximum load: 3 x 4 A, PWM frequency: ± 900 Hz, external dimensions: 86 x 86 x 13 mm, internal dimensions: 57 x 65 x 24 mm, weight: 150 g, caution: output current of power supply must not exceed 3 x 4 A. Suitable power supplies: 144 W / 12 V or 288 W / 24 V.
LEDC16 SMART PHONE RGB LED CO.. 2032,00 Kč Nejsou PSE 5503-461
1 ks 2032,00 Kč
SMART PHONE RGB LED CONTROLLER, Features, ideal for use with LED strips. See our website., Bluetooth connection with smartphone or tablet, Android device: Color Easy app, iOS device (iPhone, iPod touch and iPad): Color Easy app, 4 functions:, switching: on-off, dimming: up-down, built-in stand-alone programs: fading and flashing RGB animations (43 modes), RGB colour selection: 16 million colours, built-in protections:, incorrect cable polarity, overload, short circuit, Specifications, power supply: 6-24 VDC, maximum load: 3 x 5 A, PWM frequency: ± 8 kHz, connection method: Bluetooth V2.1 Class 2, connection distance: > 15 m (open area), weight: 150 g, overload protection: yes, overheat protection: yes, working temperature: -30 °C to +60 °C, IP rating: 66
LEDC20 INFRARED DOOR SENSOR S.. 502,00 Kč Nejsou PSE 5503-462
1 ks 502,00 Kč
INFRARED DOOR SENSOR SWITCH FOR LED STRIPS, Mount the infrared sensor on the inside of a cabinet., Open the door to activate the infrared sensor switch., Features, ideal for use with single colour LED strips. See our website, Specifications, power supply: 12 - 24 VDC, maximum load: 2 A, dimensions: 63 x 28 x 17 mm, weight: 28 g, caution: output current of power supply must not exceed 2 A. Suitable power supplies: 24 W / 12 V or 48 W / 24 V.
LEDC21 INFRARED MOVEMENT SENS.. 502,00 Kč Nejsou PSE 5503-463
1 ks 502,00 Kč
INFRARED MOVEMENT SENSOR SWITCH FOR LED STRIPS, Optical movement sensor. The sensor turns on when an object is detected., The sensor turns off when an object is detected the second time., Features, ideal for use with single colour LED strips. See our website, infrared technology, Specifications, power supply: 12 - 24 VDC, maximum load: 2 A, dimensions: 63 x 28 x 17 mm, weight: 28 g, caution: output current of power supply must not exceed 2 A. Suitable power supplies: 24 W / 12 V or 48 W / 24 V.
LEDC22 PIR SENSOR SWITCH FOR .. 502,00 Kč Nejsou PSE 5503-464
1 ks 502,00 Kč
PIR SENSOR SWITCH FOR LED STRIPS, This PIR sensor turns automatically on when a human body is detected within the detection area., The switch turns off after the human body has left the detection area for 45 seconds., Features, ideal for use with single colour LED strips. See our website, Specifications, power supply: 12 - 24 VDC, maximum load: 2 A, effective range:, detection angle: 110°, delay time: 45 s, dimensions: 63 x 28 x 17 mm, weight: 28 g, caution: output current of power supply must not exceed 2 A. Suitable power supplies: 24 W / 12 V or 48 W / 24 V.
LEDC23 TOUCH DIMMER FOR LED S.. 392,00 Kč Nejsou PSE 5503-465
1 ks 392,00 Kč
TOUCH DIMMER FOR LED STRIPS, This touch LED dimmer is based on the capacitive touch technique., Touch the metal touch tablet for switching and dimming., Features, ideal for use with single colour LED strips. See our website, double function:, switching: short touch (on-off), dimming: long touch (increase-decrease), use only with a power supply of max. 30 W / 12 V, Specifications, power supply: 12 VDC, maximum load: 2 A, PWM frequency: ± 770 Hz, dimensions: O 22 x 16 mm, mounting hole diameter: 16 mm, weight: 20 g, caution: output current of power supply must not exceed 2 A. Suitable power supplies: 30 W / 12 V.
NABÍJEČKA PRO OLOVĚNÉ AKU 6-12.. 1018,00 Kč Nejsou PSE 5501-3696
1 ks 1018,00 Kč
Inteligentní nabíječka pro olověné gelové, kyselinové a LiFePO4 akumulátory 6V a 12V / 3.8A (autobaterie aj.), AC38 is a 6 V / 12 V dual function charger for charging LiFePO4 and Lead Acid (Wet, MF, VRLA, AGM & GEL) batteries for different vehicles. The intelligent design protects the charger and battery even if users have chosen the wrong battery type. With its automatic switch-mode charger, users can simply retain their batteries to the original level, recover slightly sulfated batteries and increase battery life., Features:, protections:, short circuit, overload, wrong polarity, reverse battery, safety timer, with LED indication, Specifications:, rated input voltage: 220-240 VAC, frequency: 50 Hz, rated current: 0,6A, rated output current: 3.8 A, IP rating: IP65, dimensions: 211.3 x 84.4 x 49 mm, weight: 775 g, charging voltage:, lead acid: 7.3 / 14.4 VDC, cold/AGM: 7.4 / 14.7 VDC, LiFePO4: 12.8 V / 4 cells, charging current: 6 V / 12 V / LiFePO4, small: 0.9 A, normal: 3.8 A
PIR INFRARED MOTION DETECTOR 4.. 413,00 Kč Nejsou PSE 3000-0136
1 ks 413,00 Kč
PIR INFRARED MOTION DETECTOR průměr 45mm - BUILD IN, Features, automatic day/night identification, light sensitivity and ON-time adjustable, for building in, Specifications, detection:, angle: 360°, distance: max. 8 m (, motion speed: 0.6 - 1.5 m/s, ON-timer: adjustable from 10 s (± 3 s) up to 15 min (± 2 min), switch type: relay, light sensitivity: 3-2000 lux (adjustable), max. rated load: 800 W (incandescent lamp) / 400 W (energy saving lamp), operating temperature: -20 °C to +40 °C, power supply: 220-240 VAC 50 Hz, power consumption: 0.45 W (active) / 0.1 W (stand-by), installation height: 2.2 - 4 m, weight: ± 100 g
PIR MOTION DETECTOR 28mm PIR40.. 473,00 Kč Nejsou PSE 3000-0135
1 ks 473,00 Kč
PIR MOTION DETECTOR průměr 28mm - BUILD IN, The product is a new saving-energy switch adopting the good sensitivity detector, integrated circuit and SMT. It gathers automatic, convenient, safe, saving-energy and practical functions. The wide detection field is made up of up and down, left and right: service field. It works by receiving human motion infrared rays. When someone enters the detection fields, it can start the load at once and identify day and night automatically, it can be used with various types of lamps and lanterns, Features, with automatic day/night identification, adjustable light control, time and sensitivity, for building in, for indoor use, Specifications, switch type: relay, detection:, angle: 360°, distance: max. 8 m, motion speed: 0.6 - 1.5 m/s, ON-timer: adjustable from 8 s (± 2 s) up to 6 min (± 2 min), working temperature: -10 °C to +40 °C, working humidity:, light sensitivity:, rated load: 300 W max. (tungsten) / 100 W (fluorescent), power supply: 220 - 240 VAC / 50 Hz, power consumption: 0.45 W (active) / 0.1 W (stand-by), installation height: 2.5 - 3.5 m, dimensions:, visible part: průměr 50 x 17 mm, build-in part: průměr 40 x 40 mm, PIR sensor: průměr 28 mm, weight: ± 48 g
Reklama:

Velký dron s HD kamerou Létejte z pohledu pilota pomocí obrazovky mobilu. Foťte a natáčejte úžasná letecká videa a snímky.