HledejSoučástky.cz


Nalezených součástek: 42       Optimalizace nákupu
Součástka:
Řadit:
Obrázek Název Cena
s DPH
Sklad Obchod Sklad.č. Detail dostupnost Slevy
Optimalizace:
Popis
INRAD-94 KENWOOD 8830kHz 2100Hz SSB TS450, TS570, TS690, TS850, TS950 4,00 Kč Skladem GES 08900226
INRAD 2100Hz/8830kHz. KENWOOD TS450, TS570, TS690, TS850, TS950
ECOFLEX 10 135,00 Kč Skladem GES 06700713
Koaxiální kabel 50Ohm., 7x1,0mm, prům.10,2mm, UV odolné PVC, černý
ANTISTATICKÁ PODLOŽKA 30x55 392,00 Kč Skladem PSE 5201-296
1 ks 392,00 Kč
Antistatická podložka 30x55cm, ANTISTATIC WORKING MAT WITH GROUNDING CORD - 30 x 55 cm, Features, environmental friendly material, anti-acid, anti-alkali, anti-chemical flux, wear resistant & scratch resistant, stable performance: high and low temperature resistance, good toughness & high elasticity, suitable for various working desks, delivered with: AS17: ESD GROUNDING CORD - O 1.8 mm, Specifications, surface: matte, thickness: 2 mm, conducting layer: 1.8 mm, electrostatic dissipation layer: 0.2 mm, material:, top: static dissipative rubber, bottom: conductive rubber, dimensions: 30 x 55 cm, surface resistance:, top layer: 10^6 - 10^9 Ohm, bottom layer: 10^3 - 10^5 Ohm, volume resistance: 10^5 - 10^8 Ohm, attrition rate:, charge decay:, strength:, tear strength: 20.6 KN / m, tensile strength: 3.6 Mpa, fracture elongation: 188 %, high temperature resistance: 200 - 300 °C, softness: 103 - 109
ANTISTATICKÁ PODLOŽKA 50x60 679,00 Kč Skladem PSE 5201-2961
1 ks 679,00 Kč
Antistatická podložka 50x60cm, ANTISTATIC WORKING MAT WITH GROUNDING CORD - 50 x 60 cm, Features, environmental friendly material, anti-acid, anti-alkali, anti-chemical flux, wear resistant & scratch resistant, stable performance: high and low temperature resistance, good toughness & high elasticity, suitable for various working desks, delivered with: AS17: ESD GROUNDING CORD - O 1.8 mm, Specifications, surface: matte, thickness: 2 mm, conducting layer: 1.8 mm, electrostatic dissipation layer: 0.2 mm, material:, top: static dissipative rubber, bottom: conductive rubber, dimensions: 50 x 60 cm, surface resistance:, top layer: 10^6 - 10^9 Ohm, bottom layer: 10^3 - 10^5 Ohm, volume resistance: 10^5 - 10^8 Ohm, attrition rate:, charge decay:, strength:, tear strength: 20.6 KN / m, tensile strength: 3.6 Mpa, fracture elongation: 188 %, high temperature resistance: 200 - 300 °C, softness: 103 - 109
INRAD-729 YAESU 455kHz 1000Hz CW FT847 5,00 Kč Nejsou GES 08902153
INRAD 1000Hz/455kHz YAESU FT847
INRAD-729 YAESU 455kHz 1000Hz CW FT817, FT857, FT897, FT2000 5,00 Kč Nejsou GES 08902152
INRAD 1000Hz/455kHz YAESU FT817, FT857, FT897, FT2000
INRAD-2311 YAESU 9000kHz 6000Hz AM FT7B, FT301, R530 4,00 Kč Nejsou GES 08902127
INRAD 6000Hz/9000kHz YAESU FT7B, FT301, R530
INRAD-94 KENWOOD 8830kHz 2100Hz SSB TS120, TS130, TS430, TS440, TS830, TS870, TS930, TS940 4,00 Kč Nejsou GES 08900227
INRAD 2100Hz/8830kHz. KENWOOD TS120, TS130, TS430, TS440, TS830, TS870, TS930, TS940
INRAD-260 KENWOOD 8831,5kHz 6000Hz AM TS430 4,00 Kč Nejsou GES 08901789
INRAD 6000Hz/8831.5kHz KENWOOD TS430 (lepší náhrada za YK88A KENWOOD)
INRAD-707C YAESU 455kHz 5800Hz AM FT1000, FT1000MP, MARKV 5,00 Kč Nejsou GES 08901949
INRAD 5800Hz/455kHz YAESU FT1000, FT1000MP, MARKV
MFJ-299 Stolní exkluzivní mikrofonní konzole s ekvalizérem 3,00 Kč Nejsou GES 08900631
Deluxe Desk Top Microphone/EQ
MFJ-969 Anténní tuner - roller, 300W, 160m - 6m 7,00 Kč Nejsou GES 08901033
TUNER, HF+6M, 300W, ROLLER, DL, XMTR, ANT SW.
MFJ-989D 1500 Watt Anténní tuner - roller, 160-10m 14,00 Kč Nejsou GES 08901040
1500 Watt Anténní tuner 1.8 až 30 MHz
MFJ-4125 Spínaný zdroj 85-135/170-260VAC, 13.8V/25Amax/22Atrvale. Nemá CE certifikaci 2,00 Kč Nejsou GES 08900708
Spínaný zdroj 85-135/170-260VAC, 13.8V/25Amax/22Atrv.; Nemá certifikaci pro použití na území EU.
MFJ-991B AUTOMATICKÝ ANTÉNNÍ TUNER 300W / 1,8-30MHz 7,00 Kč Nejsou GES 08901783
Automatický tuner 1.8-30MHz; 300W/150W SSB/CW; 257x71x234mm; 1.7kg
MFJ-993B AUTOMATICKÝ ANTÉNNÍ TUNER 300W / 1,8-30MHz 9,00 Kč Nejsou GES 08901784
Automatický tuner 1.8-30MHz; 300W/150W SSB/CW; 257x71x234mm; 1.8kg
MFJ-994B AUTOMATICKÝ ANTÉNNÍ TUNER 600W/300W 1,8-30MHz 12,00 Kč Nejsou GES 08901785
Automatický tuner 1.8-30MHz; 600W/300W SSB/CW; 257x71x234mm; 1.7kg
MFJ-994BRT AUTOMATICKÝ DÁLKOVĚ OVLÁDANÝ ANTÉNNÍ TUNER 600W/300W 1,8-30MHz 13,00 Kč Nejsou GES 08902291
Automatický dálkově ovládaný tuner 1.8-30MHz; 600W/300W SSB/CW; 257x71x234mm; 1.7kg
ALS-500MXCE 36,00 Kč Nejsou GES 08900303
Polovodičový PA 500Wout (70Win); 13.6VDC / 80A; 4kg; 9,5x22,9x39,4cm; 160-10m
ALS-500MRXCE 37,00 Kč Nejsou GES 08901827
Polovodičový PA 500Wout (70Win); 13.6VDC/80A; 9,5x22,9x39,4cm; 160-10m+dálk.ovládání
AL-82XCE ELEKTRONKOVÝ PA 1500W 160-10M 99,00 Kč Nejsou GES 08900315
PA >1.5kW CW,RTTY (>1.8kW PEP)/100Win; 2x 3-500Z; 160-10m; 230VAC
AL-82XQCE ELEKTRONKOVÝ PA 1500W 160-10M 114,00 Kč Nejsou GES 08900316
PA >1.5kW CW,RTTY (>1.8kW PEP) / 100Win; 2x 3-500Z; 160-10m; QSK-5PC; 230V
AL-80BXCE 55,00 Kč Nejsou GES 08900306
PA >1kW SSB PEP(800W CW)/85Win; osazeno 3-500; 160-10m; 230VAC
AL-80BXQCE 65,00 Kč Nejsou GES 08900307
PA >1kW SSB PEP(800W CW)/85Win; osaz. 3-500; QSK-5PC; 160-10m; 230VAC
AL-800XCE 85,00 Kč Nejsou GES 08900308
PA >1.25kW SSB PEP (1kW CW) / 70Win; osaz.3CX800A7; 160-10m; 230VAC
AL-800HXCE 129,00 Kč Nejsou GES 08900309
PA >1.5kW CW,SSB PEP/55Win; 2x 3CX800A7; 160-10m; QSK-5PC; 230VAC
ANTISTATICKÁ PODLOŽKA 100x122 1787,00 Kč Nejsou PSE 5201-2963
1 ks 1787,00 Kč
ANTISTATICKÁ PODLOŽKA 100 x 122 CM, Features, environmental friendly material, anti-acid, anti-alkali, anti-chemical flux, wear resistant & scratch resistant, stable performance: high and low temperature resistance, good toughness & high elasticity, suitable for various working desks, Specifications, surface: matte, thickness: 2 mm, conducting layer: 1.8 mm, electrostatic dissipation layer: 0.2 mm, material:, top: static dissipative rubber, bottom: conductive rubber, dimensions: 100 x 122 cm, surface resistance:, top layer: 10^6 - 10^9 Ohm, bottom layer: 10^3 - 10^5 Ohm, volume resistance: 10^5 - 10^8 Ohm, attrition rate:, strength:, tear strength: 20.6 KN / m, tensile strength: 3.6 Mpa, fracture elongation: 188 %, high temperature resistance: 200 - 300 °C, softness: 103 - 109
ANTISTATICKÁ PODLOŽKA 70x100 822,00 Kč Nejsou PSE 5201-2962
1 ks 822,00 Kč
Antistatická podložka 70x100cm, ANTISTATIC WORKING MAT WITH GROUNDING CORD - 70 x 100 cm, Features, environmental friendly material, anti-acid, anti-alkali, anti-chemical flux, wear resistant & scratch resistant, stable performance: high and low temperature resistance, good toughness & high elasticity, suitable for various working desks, delivered with: AS17: ESD GROUNDING CORD - O 1.8 mm, Specifications, surface: matte, thickness: 2 mm, conducting layer: 1.8 mm, electrostatic dissipation layer: 0.2 mm, material:, top: static dissipative rubber, bottom: conductive rubber, dimensions: 70 x 100 cm, surface resistance:, top layer: 10^6 - 10^9 Ohm, bottom layer: 10^3 - 10^5 Ohm, volume resistance: 10^5 - 10^8 Ohm, attrition rate:, charge decay:, strength:, tear strength: 20.6 KN / m, tensile strength: 3.6 Mpa, fracture elongation: 188 %, high temperature resistance: 200 - 300 °C, softness: 103 - 109
BOX PE-IP67 HC300S 1754,00 Kč Nejsou PSE 5210-2902
1 ks 1754,00 Kč
HARD CASE - 336 x 300 x 148 mm - WITH FOAM, Features, rugged dual action latches (2) provide extra clamping power for added security and a positive waterproof seal, 2 separate layers of cubed pick foam, waterproof (IP67), Specifications, dimensions:, outer (L x W x H): 336 x 300 x 148 mm, inner (L x W x H): 300 x 225 x 132 mm, colour: black, weight: 2 kg, material: polypropylene
CONTACT CLEANER 390 - 200ml 239,00 Kč Nejsou PSE 5601-312
1 ks 239,00 Kč
Čistící a mazací preparát na elektrické kontakty, relé apod., Balení: aerosol ve spreji, Obsah: 200ml, Výrobce: KONTAKT CHEMIE, Značení výrobce: 30797-AA
DETEKTOR POHYBU PIR1300 249,00 Kč Nejsou PSE 3000-0134
1 ks 249,00 Kč
Features, easy to install and to use, detects day and night automatically, adjustable detection area: down/up, left/right, adjustable activation duration, Specifications, power supply: 220-240 VAC, 50 Hz, 6 A max., detection range: 5 - 12 m max., detection angle: 180°, ambient light:, installation height: 1.8 - 2.5 m, power consumption: approx. 0.5 W, motion speed detection: 0.6 - 1.5 m/s, working temperature: -20 °C to + 40 °C, working humidity:, max. rated load:, resisitve: 1200 W (230 VAC), inductive: 300 W (230 VAC), IP rating: IP44, switch type: relay, relay output: normally open (N.O.), switch-off delay: ± 10 seconds to ± 7 minutes
DMX EFFECT FAN HQSM10009 11706,00 Kč Nejsou PSE 6000-369
1 ks 11706,00 Kč
Mini full option stage and touring fan, with DMX and timer control., Features, wind machine with DMX interface and built-in LCD display for stage and touring, applications, compact metal enclosure with brackets for road use, great effect when used with fog, snow, bubble machines, etc., air discharge angle adjustable, low power consumption, Specifications, power supply: 230 VAC 50/60 Hz, power consumption: 125 W 0.56 A, airflow: 30 m3/min, control: built-in LCD on board controller, speed: 2500 rpm, DMX512: one channel 3-PIN, dimensions: 509 x 122 x 443 mm, weight: 9.5 kg
DOOR AND WINDOW HOME ALARM SYS.. 690,00 Kč Nejsou PSE 3000-0742
1 ks 690,00 Kč
This basic home alarm system has a vibration and magnet sensor. The magnet sensor can be installed on a door or window. A solar panel provides power during standby. The battery power is only used during an alarm trigger., Features, alarm trigger:, magnetic door or window contact, vibration sensor, solar panel to extend battery lifetime, programmable 4-digit security code, 130 dB alarm sound, quick and easy installation, Specifications, power supply:, solar panel: 4.5 V, battery: 3 x 1.5 V AAA batteries ( LR03C: ALKALINE AAA / LR3 1.5 V - 1200 mAh (4pcs/bl) , not incl.), sound level: 130 dB, alarm delay: exit delay 30 seconds, entry delay 5 seconds, weight: 75 g, dimensions: 52 x 82 x 23 mm
DUAL MOONFLOWER WITH WASH EFFE.. 2251,00 Kč Nejsou PSE 6000-325
1 ks 2251,00 Kč
This small and lightweight effect creates a moonflower with a wide beam effect in combination with a powerful wash effect of 6 x 1 W RGB LED. Ideal for all kinds of smaller events., Features, stand alone or music controlled mode, adjustable speed and sensitivity, Specifications, power supply: 100-240 VAC 50/60 Hz, power consumption: 20 W, power factor: 0.49, LEDs in device:, dual flower: 54 x 5 mm RGB (18 pcs red, 12 pcs green, 24 pcs blue), wash: 6 x 1 W RGB, dimensions: 250 x 230 x 145 mm, weight: 1.3 kg
K8071 - 1W/3W HIGH-POWER LED D.. 214,00 Kč Nejsou PSE 5503-413
1 ks 214,00 Kč
Stavebnice 1W/3W HIGH-POWER LED DRIVER, Power up to four 1W or two 3W high-power LEDs (not incl.)., Features, delivers accurate constant current required by most high-power LEDs, high efficiency due to switch mode principle, built-in rectifier for easy connection to AC source, compact size, short-circuit protected, no heatsink required, also suited as fixed current NiCd/NiMH battery charge circuit, for home, disco, stage, education, architectural lighting, science projects, ..., also available as completely mounted module VM143/1W and VM143/3W, Specifications, 350mA or 700mA constant current source, input voltage: 6..12VAC/9-18VDC, power consumption: 650mA max., dimensions: 45x30x16mm
K8072 - DMX-CONTROLLED RELAY S.. 741,00 Kč Nejsou PSE 5503-414
1 ks 741,00 Kč
Stavebnice DMX-CONTROLLED RELAY SWITCH, This Kit allows you to control a relay by means of the well-known DMX512 protocol. This protocol was developed by USITT in 1986 to control dimmers, scanners, moving-head spots and other lighting devices with a simple wiring., In some cases, a simple ON/OFF selection is desired. This is where this K8072 comes in. It is actually a bus-controlled power driver. The relay will be activated when the DMX value of the set channel equals 140 or more and turns off when the value is 120 or less., Together with our K8062/VM116, a computer-controlled automation will be very easy to build., Features, system addresses: 512 unique addresses, DIP switch settable, LED indication for power supply, relay output status and error situation, Safe DMX data stream - mode reducing interference to a minimum, Relay hold - function in case of DMX signal loss, control: DMX-512, 3-pin XLR plug (incl.), also available as completely mounted module VM138, Specifications, switching capacity: 8A, supply voltage: 12VDC non-regulated, power consumption: max. 100mA, dimensions: 105 x 60 x 30mm
K8093 - REMOTE CONTROLLED HOME.. 881,00 Kč Nejsou PSE 5503-421
1 ks 881,00 Kč
Stavebnice REMOTE CONTROLLED HOME ALARM, Attention : remote control not included!, Features, can store up to 4 remote controls (FIFO), chime function, built-in pre-alarm, always armed after power outage, the built-in relay can switch a siren (not included) (3 A 125 VAC) after 20 s pre-alarm, arm time:, slow with indication: if the door is open or closed (time to leave the room), quickly, magnetic door contact included, compatible remotes: not included, VM130T: 2-channel RF remote control transmitter, VM166T: 2-channel transmitter with LED light, Specifications, power supply: 12V DC, consumption:, armed: 20 mA, alarm relay powered: 50 mA, relay: 3 A - 125 VAC, frequency: 433.92 MHz, 32-bit code technology, more than 1.000.000.000 unique codes, code can easily be changed for safety purposes, transmitter: R&TTE compliant (ETS 300-220) *, open field range of up to 30 m possible, external antenna wire, receiver dimensions: 108 x 102 x 45 mm
K8096 1-CHANNEL USB STEPPER MO.. 1313,00 Kč Nejsou PSE 5503-423
1 ks 1313,00 Kč
Stavebnice 1 CHANNEL USB STEPPER MOTOR CARD, While the motor turns you can simultaneously check the status of the dry-inputs (ex. emergency stop signal, limit detection...)., Use the switch inputs to test the motor., Can be used in every application where positioning is needed, (for example, plotter, printer, valves, automations …)., Features, capable of driving 1 stepper motor, suited for bipolar motors, current of the motor can be adjusted (trimmer), over current protection sensing, onboard switch mode supply, USB connection: control the motor using your computer, DLL file supplied to write your own software, includes board-to-wire connections, Specifications, power output: 750 mA continuous, (1 A peak), wide range AC - power input: 5 ... 30 V, 5 dry-contact inputs, 1 logic open collector output, power supply: 10 ... 30 VAC, dimensions: 117 x 65.5 x 25 mm
K8097 4-CHANNEL USB STEPPER MO.. 2073,00 Kč Nejsou PSE 5503-424
1 ks 2073,00 Kč
Stavebnice 4 CHANNEL USB STEPPER MOTOR CARD, USB controlled stepper motor card, to drive 4 stepper motors., While the motor turns you can simultaneously check the status of the dry-inputs (ex. emergency stop signal, limit detection...)., Use the switch inputs to test the motors., Can be used in every application where positioning is needed, (for example, plotter, printer, valves, automations …)., Features, capable of driving 4 independent stepper motors, suited for bipolar motors, current can be adjusted for each motor independently (trimmer), over current protection sensing, onboard switch mode supply, USB connection: control the motors using your computer, DLL file supplied to write your own software, includes board to wire connections, Specifications, power output per motor: 750mA continuous, ( 1A peak), wide range AC - power input: 5 ... 30V, 6 dry-contact inputs, 1 logic open collector output, power supply: 10 ... 30VAC, dimensions: 140 x 100 x 30mm
K8600 VERTEX NANO 3D PRINTER K.. 9710,00 Kč Nejsou PSE 5503-487
1 ks 9710,00 Kč
Stavebnice VERTEX NANO 3D PRINTER KIT, REVOLUTIONARY 3D PRINTING ON A NANO SIZE, Based on the accuracy and user-friendly character of the first K8400: VERTEX 3D PRINTER , we bring you the Vertex Nano. This smaller version combines the latest technologies to print refined 3D objects of max. 8 x 8 x 7,5 cm in a fast way. Therefore, it is the ideal 3D printer for those of you who want to dip their toe in the world of 3D printing!, 3D PRINTING FOR YOU, The Vertex Nano is Velleman Projects 3rd generation 3D printer. Thanks to our experience, we have managed to keep this new 3D printer accurate and open source but in a compact and affordable design., Check out vertex3dprinter.eu for more info!, Specifications:, printing:, print technology: Fused Filament Fabrication (FFF), layer resolution: standard: 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm), build plate: 80 x 80 mm, build volume: 80 x 80 x 75 mm, build plate surface: Metal plate with BuildTak (consumable, also sold separately), print speed: 40mm/s, travel speed: 70mm/s, filament diameter: 1.75 mm, prints: PLA, ABS (testing with other materials in progress), maximum nozzle operating temperature: 245 °C, nozzle diameter: 0,35mm (single head), software:, firmware: Modified Open Source Marlin 3D Printer. Firmware - user upgradable, software: Repetier - CuraEngine - Slic3r (RepRap compatible), hardware:, dimensions: 230 x 150 x 160 mm, frame: sturdy, metal frame, weight: 2.3 kg, average noise level during operation: 45dB(A), ambient operation temperature: max 25 °C, storage temperature: - 10 °C to + 40 °C, electrical:, communication: an SD card for direct printing and a USB connection for updates, controller board: AVR ATmega2560 based, display: 4 x 20 char. blue LCD with white backlight, AC input: 100-240 VAC, 50/60Hz, LED illuminated logo, https://youtu.be/pVv1E2gD-lA, https://youtu.be/TGuSgsHAH8A
KSR17 SOLÁRNÍ HYDRAULICKÉ KONS.. 801,00 Kč Nejsou PSE 5503-3868
1 ks 801,00 Kč
Stavebnice., 12 IN 1 SOLAR HYDRAULIC CONSTRUCTION KIT, (Návod pouze anglicky), A series of Robot Kits for the future engineer. Build this kit and find out how much fun electronics, mechanics or hydraulics can be!, The solar and hydraulic powered robot can be transformed into twelve different animals and mechanic robots (monkey, T-Rex, scorpion, excavator, etc). The robots can move easily and provide great interaction with kids., The 12 in 1 solar hydraulic powered robot teaches children the benefit of alternative energy. This robot is powered by sun and water, there are no batteries required. The robot can move in direct sunlight and allows children to play with it outdoors and also encourage them to explore the world. The models refer to animals in nature. While playing, the children learn about their characteristics and observe how they work. Children can even use their own imagination to create a brand new species., Features, recommended age: 14+, 230 pcs, solar power (no battery required), contents:, solar panel, plastic parts, detailed assembly instructions, Specifications, 12 different animals or robots:, monkey, master & dog, pterosaus, T-rex, elephant, crocodile, ostrich, scorpion, forklift, buggy, excavator, obstacle avoiding rover
LEDC02 INFRARED SENSOR SWITCH.. 358,00 Kč Nejsou PSE 5503-450
1 ks 358,00 Kč
INFRARED SENSOR SWITCH FOR LED STRIPS, Mount the infrared sensor on the inside of a cabinet., Open the door to activate the infrared sensor switch., Features, ideal for use with single colour LED strips. See our website, Specifications, power supply: 12 - 24 VDC, maximum load: 2.5 A, dimensions: 31 x 38 x 9 mm, weight: 22 g, caution: output current of power supply must not exceed 2.5 A. Suitable power supplies: 30 W / 12 V or 60 W / 24 V.
Reklama:

Velký dron s HD kamerou Létejte z pohledu pilota pomocí obrazovky mobilu. Foťte a natáčejte úžasná letecká videa a snímky.