HledejSoučástky.cz


Nalezených součástek: 107       Optimalizace nákupu
Součástka:
Řadit:
Obrázek Název Cena
s DPH
Sklad Obchod Sklad.č. Detail dostupnost Slevy
Optimalizace:
Popis
CG2 0,31 Kč Skladem SOS 42648
e-shop 900
200 ks 0,31 Kč
400 ks 0,30 Kč
500 ks 0,30 Kč
1000 ks 0,29 Kč
Načteno
Těleso konektoru CG F 2P P2,54mm krimp.
CG1 0,46 Kč Skladem SOS 71287
e-shop 200
100 ks 0,46 Kč
500 ks 0,24 Kč
1000 ks 0,24 Kč
Načteno
Těleso konektoru CG F 1P P2,54mm krimp.
CG3 0,46 Kč Skladem SOS 43075
e-shop 400
100 ks 0,46 Kč
200 ks 0,38 Kč
500 ks 0,36 Kč
1000 ks 0,34 Kč
Načteno
Těleso konektoru CG F 3P P2,54mm krimp.
CKA 0,46 Kč Skladem SOS 42649
e-shop 3000
100 ks 0,46 Kč
200 ks 0,40 Kč
500 ks 0,39 Kč
1000 ks 0,36 Kč
Načteno
Kontakt CGx F krimp.
CG4 0,47 Kč Skladem SOS 43076
e-shop 200
100 ks 0,47 Kč
200 ks 0,46 Kč
500 ks 0,44 Kč
1000 ks 0,41 Kč
Načteno
Těleso konektoru CG F 4P P2,54mm krimp.
CG5 0,54 Kč Skladem SOS 43077
e-shop 200
100 ks 0,54 Kč
200 ks 0,52 Kč
500 ks 0,51 Kč
1000 ks 0,47 Kč
Načteno
Těleso konektoru CG F 5P P2,54mm krimp.
Arduino Nano starter kit 1,00 Kč Skladem GME 772-307
Kit pro výuku a hrátky s Ardiono Nano. Součástí ...
Ultimate starter kit pro Arduino UNO 1,00 Kč Skladem GME 772-309
Tento Arduino Starter Kit je určen pro Arduino pokro...
SZH-002T-P0.5 1,11 Kč Skladem SOS 7740
e-shop 350
25 ks 1,11 Kč
100 ks 0,93 Kč
250 ks 0,90 Kč
1000 ks 0,81 Kč
Načteno
Kontakt-dutinka krimp.
PHR-7 1,11 Kč Skladem SOS 104798
e-shop 850
50 ks 1,11 Kč
100 ks 1,04 Kč
1000 ks 0,91 Kč
5000 ks 0,80 Kč
Načteno
Těleso konektoru PH F 7P P2mm
INRAD-94 KENWOOD 8830kHz 2100Hz SSB TS450, TS570, TS690, TS850, TS950 3,00 Kč Skladem GES 08900226
INRAD 2100Hz/8830kHz. KENWOOD TS450, TS570, TS690, TS850, TS950
F1109 MS-6 3,50 Kč Skladem GME 656-319
Samoupínací distanční sloupek, vhodný pro MOTHER BOA...
B2B-PH-K-S(LF)(SN) 3,57 Kč Skladem SOS 80873
e-shop 560
20 ks 3,57 Kč
50 ks 3,41 Kč
250 ks 3,07 Kč
1000 ks 2,72 Kč
Načteno
Konektor PH M 2P P2mm THT
1954097-1 4,57 Kč Skladem SOS 73962
e-shop 29000
10 ks 4,57 Kč
Načteno
Konektor SSL Poke-In 2P P4mm SMD 4A/250VAC
B2B-PH-SM4-TB(LF)(SN) 13,07 Kč Skladem SOS 133382
e-shop 26
5 ks 13,07 Kč
10 ks 12,58 Kč
50 ks 11,41 Kč
250 ks 9,98 Kč
1000 ks 9,33 Kč
Načteno
Konektor PH M 2P P2mm SMD
ASZHSZH28K152 15,00 Kč Skladem SOS 307294
e-shop 134
5 ks 15,00 Kč
10 ks 14,52 Kč
50 ks 13,19 Kč
250 ks 11,51 Kč
500 ks 11,13 Kč
Načteno
Jumper SZH F P1,5mm kabel 152mm
AKKU TAMIYA-M 16,58 Kč Skladem SOS 69810
e-shop 44
5 ks 16,58 Kč
10 ks 16,09 Kč
40 ks 14,64 Kč
150 ks 13,79 Kč
Načteno
Konektor M Tamiya s kablíkem 14cm P6,2mm
CT0411TZ01 17,54 Kč Skladem SOS 60987
e-shop 10
5 ks 17,54 Kč
10 ks 16,94 Kč
25 ks 15,85 Kč
Načteno
Konektor pro TP320240, 4P P1mm
CT201DTZ0 17,54 Kč Skladem SOS 63254
e-shop 10
5 ks 17,54 Kč
10 ks 16,94 Kč
25 ks 15,85 Kč
Načteno
Konektor pro BG320240, 20P P1mm
AKKU TAMIYA-F 18,76 Kč Skladem SOS 70479
e-shop 46
4 ks 18,76 Kč
8 ks 18,15 Kč
10 ks 17,91 Kč
30 ks 16,58 Kč
130 ks 15,37 Kč
Načteno
Konektor F Tamiya s kablíkem 14cm P6,2mm
DF40C(2.0)-40DS-0.4V(51) 18,88 Kč Skladem SOS 124859
e-shop 1296
4 ks 18,88 Kč
8 ks 18,27 Kč
10 ks 18,03 Kč
50 ks 16,34 Kč
100 ks 15,73 Kč
Načteno
Konektor DF40 F 40P P0,4mm h=2mm SMD
CON RFM12B 30,98 Kč Skladem SOS 182355
e-shop 12
3 ks 30,98 Kč
5 ks 30,13 Kč
20 ks 27,71 Kč
Načteno
Converter Board RFM12B bez zásuvky a konektoru SMA
2200SB-60G-SM-45 61,71 Kč Skladem SOS 56556
e-shop 566
1 ks 61,71 Kč
2 ks 57,11 Kč
16 ks 47,43 Kč
48 ks 44,29 Kč
192 ks 39,32 Kč
Načteno
Konektor BTB 60P for SIM548C/300C P1,27mm SMD
Cooling Kit Raspberry 94,86 Kč Skladem SOS 216879
e-shop 18
1 ks 94,86 Kč
3 ks 90,27 Kč
10 ks 83,13 Kč
25 ks 79,01 Kč
Načteno
Set of Heatsinks for RPi A, B, B+, 2B, 3B, pcDuino, Cubieboard, Banana Pi
DF40HC(3.0)-70DS-0.4V(51) 96,80 Kč Skladem SOS 231973
e-shop 87
1 ks 96,80 Kč
5 ks 87,48 Kč
20 ks 81,55 Kč
3000 ks 61,71 Kč
Načteno
Konektor DF40 F 70P P0,4mm h=2mm SMD
BB-005 104,18 Kč Skladem SOS 53508
e-shop 46
1 ks 104,18 Kč
10 ks 86,15 Kč
25 ks 79,01 Kč
50 ks 73,81 Kč
Načteno
Kontaktní pole 270 zdířek 57x91x9mm
4DCAPE-43T 121,00 Kč Skladem SOS 150784
e-shop 7
1 ks 121,00 Kč
Načteno
Displej TFT 4,3" 480x272 RT pro BeagleBoard
EA 9781-1USB 133,10 Kč Skladem SOS 268276
e-shop 1
1 ks 133,10 Kč
Načteno
Testovací deska USB pro displej OLED
EA-XPR-020 145,20 Kč Skladem SOS 151074
e-shop 29
1 ks 145,20 Kč
Načteno
Vývojová deska LPCXpresso
BG96MATEA-128-SGN 145,20 Kč Skladem SOS 262914
e-shop 14
1 ks 145,20 Kč
Načteno
LTE Cat M1/Cat NB1/EGPRS modul on Adaptor Board
BB-01 ( 640/200 ) 208,12 Kč Skladem SOS 45832
e-shop 89
1 ks 208,12 Kč
10 ks 170,61 Kč
25 ks 156,09 Kč
50 ks 135,52 Kč
Načteno
Kontaktní pole 840 zdířek 66x174mm
CleO RIO 275,88 Kč Skladem SOS 222707
e-shop 8
1 ks 275,88 Kč
Načteno
CleO-Arduino Adapter Board
VM800P43A-BK 290,40 Kč Skladem SOS 161481
e-shop 1
1 ks 290,40 Kč
Načteno
PLUS Board - 4,3" TFT displej, mont.rámeček, černý 480x272
SC20-W-TE-A (SC20WATEA-8GB-STD) 387,20 Kč Skladem SOS 236359
e-shop 4
1 ks 387,20 Kč
Načteno
WiFi, Bluetooth modul on Adaptor Board
Raspberry Pi camera board, 5Mpx 399,00 Kč Skladem GME 769-577
Kamera pro Raspberry Pi s rozlišením 5Mpx a standard...
TEK3-IMX6Q-R20-E04-L130-XG20 447,70 Kč Skladem SOS 229550
e-shop 3
1 ks 447,70 Kč
Načteno
TEK3 Fanless Box PC i.MX6 Quad 2GB RAM 4GB eMMC Galvanic Isolated CAN RS232 GPIO 10-30V Power
VM800C50A-D 484,00 Kč Skladem SOS 145192
e-shop 7
1 ks 484,00 Kč
Načteno
MCU Adapter Board včetně 5,0" TFT displeja 480x272
ARDUINO MICRO (65192) 560,23 Kč Skladem SOS 160123
e-shop 3
1 ks 560,23 Kč
Načteno
Vývojová deska 20 I/O Pin
BB-2T1D-01 ( 1280/100 ) 571,12 Kč Skladem SOS 45833
e-shop 14
1 ks 571,12 Kč
3 ks 517,88 Kč
5 ks 492,47 Kč
10 ks 458,59 Kč
Načteno
Kontaktní pole 1380 zdířek 220x120mm
Arduino Nano 3.0 (A000005) 609,84 Kč Skladem SOS 104364
e-shop 6
1 ks 609,84 Kč
Načteno
Develeopment Kit For Evaluation Of ATmega328P
Arduino Board Uno Rev3 USED - DIP Version ATMega328 (A000066) 655,82 Kč Skladem SOS 308616
e-shop 15
1 ks 655,82 Kč
Načteno
Arduino Board Uno Rev3 USED - DIP Version ATMega328
Arduino Board Uno Rev3 - DIP Version ATMega328 (A000066) 675,18 Kč Skladem SOS 218660
e-shop 10
1 ks 675,18 Kč
Načteno
Arduino Board Uno Rev3 - DIP Version ATMega328
UG95-TE-A 689,70 Kč Skladem SOS 173917
e-shop 8
1 ks 689,70 Kč
Načteno
Dual-Band 3G/UMTS/GSM/GPRS/EDGE modul on Adaptor Board
Raspberry Pi 2 Model B v1.2 741,73 Kč Skladem SOS 227069
e-shop 121
1 ks 741,73 Kč
Načteno
RPI-B BCM2837 32bit mode 1GB RAM
BB-2T4D-01 ( 1280/400 ) 756,25 Kč Skladem SOS 45834
e-shop 4
1 ks 756,25 Kč
3 ks 682,44 Kč
5 ks 648,56 Kč
10 ks 563,86 Kč
Načteno
Kontaktní pole 1680 zdířek 220x150mm
Raspberry Pi 3 Model A+ (RPI3-MODAP) 803,44 Kč Skladem SOS 307771
e-shop 17
1 ks 803,44 Kč
Načteno
RPI-B BCM2837B0 64bit mode 512MB RAM
Arduino Starter Kit English (K000007) 810,70 Kč Skladem SOS 227404
e-shop 9
1 ks 810,70 Kč
5 ks 556,60 Kč
Načteno
Starter Kit
BB-3T5D-01 ( 1920/500 ) 905,08 Kč Skladem SOS 45835
e-shop 8
1 ks 905,08 Kč
3 ks 819,17 Kč
5 ks 775,61 Kč
10 ks 676,39 Kč
Načteno
Kontaktní pole 2420 zdířek 235x185mm
RASPBERRY PI CAMERA BOARD, 8MP 950,00 Kč Skladem GME 769-400
Inovovaná přídavná kamera k Raspberry PI s rozlišení...
ARDUINO MEGA2560 REV3 (A000067) 1004,30 Kč Skladem SOS 151269
e-shop 5
1 ks 1004,30 Kč
Načteno
Vývojová deska ATmega2560
BB-4T7D-01 ( 2560/700 ) 1045,44 Kč Skladem SOS 45836
e-shop 6
1 ks 1045,44 Kč
3 ks 938,96 Kč
5 ks 889,35 Kč
10 ks 778,03 Kč
Načteno
Kontaktní pole 3260 zdířek 250x240mm
VM800P50A-BK 1089,00 Kč Skladem SOS 161486
e-shop 6
1 ks 1089,00 Kč
Načteno
PLUS Board - 5" TFT displej, mont.rámeček, černý 480x272
MM900EV2A 1111,99 Kč Skladem SOS 204867
e-shop 3
1 ks 1111,99 Kč
Načteno
FT900 vývojový modul, VGA kamera
UG96-TE-A (UG96LATEA-128-STD) 1124,09 Kč Skladem SOS 187196
e-shop 6
1 ks 1124,09 Kč
Načteno
Multi-Band 3G/UMTS/GSM/GPRS/EDGE modul on Adaptor Board
PICO-PI-IMX7-USED 1137,40 Kč Skladem SOS 307202
e-shop 6
1 ks 1137,40 Kč
Načteno
SFF i.MX7D 512MB 4GB eMMC RAM 0…60°C
Aplikační deska C-Control, 9-12 V/DC 2190,00 Kč Skladem Puhy c_198847
Centrální sklad 6
1 ks 2190,00 Kč
Načteno
Aplikační deska je hardware vývojového a programového prostředí pro C-Control I Unit-M 2.0 (i stará generace 1.1 a 1.2), Unit-M Advanced, a s dodatkovým modulem také pro Unit Micro. Slouží k přijímání Unit a rozšiřovacích modulů obsažených v příslušenství, stejně tak přijímací desky DCF. Je to vhodný pomocný prostředek, aby s malou pracností rychle došlo k systémovému řešení. Ideální pro školy, instituty, příležitostné uživatele a zkušené elektroniky. Všechna potřebná připojení Unit-M 2.0 jsou vyvedena na vedení Bus se 4 kusy 40pol. zdířkových lišt. Do těchto se mohou rozšiřovací desky jednoduše zasunout. Všechna připojení jsou přehledně popsána.Vlastnosti:Ideální rozšíření pro všechny Unit série C-Control IRozsáhlé rozšiřovací modulyIdeální rozšíření pro všechny Unit série C-Control IPřiloženo k dodávce:Kabel RS232Softwarové CDGumové nožičkyNávod k použití.Vybavení:Regulátor kontrastuPagerKonektory k programování Unit-M 1.1, 1.2, 2.0 a pro I2C BusWago svorky pro RS232 okružní vedeníPozice pro přijímací desku DCF773 LED k signalizaci provozuKlávesnice s 16 tlačítkyOsvětlený LCD displej, 2 x 16 Bodových znaků1 A regulátor pevného napětíParametry:Provozní napětí (text): 9 - 12 V/DCTyp (výrobce): Application-BoardSérie (vývojové kity): IVnější délka: 100 mmProvozní napětí: 9 V/DC · 12 V/DCVnější výška: 40 mmVnější šířka: 160 mmTyp modulu C-Control (kategorie): Vývojová deska
Mikrokonektorový adaptér SchmartBoard 202-0041-01 463,00 Kč Neznama GME 772-063
Mikrokonektorový adaptér pro rodinu Surfa Mount. ...
Programátor a debugger pro NXP Arm LPC-Link2 968,00 Kč Neznama GME 772-087
LPC-LINK2, GENERAL PURPOSE Silicon Family Name: LP...
SMD stavebnice pro výuku pájení + rotující kolo s LED - C2P0028 599,00 Kč Neznama GME 766-454
Pokročilá elektronická stavebnice MEGABOARD byla spe...
Vývojový kit RASPBERRY PI Energine ENER314 RF board 299,00 Kč Neznama GME 769-281
Kit pro Raspberry Pi - dálkové ovládání. Dosah až 30...
MB90F543PFR SMD 790,00 Kč Neznama GME 979-004
Fujitsu 16-bit Proprietary Microcontroller CMOS F2...
Stavebnice Velleman MK189 - Kontrolka dobíjení s R/G diodou 149,00 Kč Neznama GME 765-430
Modul ke kontrole stavu dobíjení s indikací R/G diod...
F-ENIKA Tx Keyboard Klávesnice 990,00 Kč Neznama GME 757-098
Vysílač v podobě klávesnice lze použít pro ovládání ...
INRAD FT-920 FILTER SWITCH BOARD MODULE 2,00 Kč Nejsou GES 08901740
Modul pro TCVR FT920. Umožní instalovat 1 filtr INRAD nebo 2 filtry INRAD za sebou
EUD - Elektronická úřední deska a informační a reklamní panel 0,00 Kč Nejsou GES 08805298
Elektronická úřední deska a informační a reklamní panel
EUD - Elektronická úřední deska a informační panel 0,00 Kč Nejsou GES 08805532
Elektronická úřední deska a informační a reklamní panel
INRAD-117 EXPERIMENTER KIT YAESU, KENWOOD 1,00 Kč Nejsou GES 08902124
INRAD 117 experimentální sada
INRAD-94 KENWOOD 8830kHz 2100Hz SSB TS120, TS130, TS430, TS440, TS830, TS870, TS930, TS940 4,00 Kč Nejsou GES 08900227
INRAD 2100Hz/8830kHz. KENWOOD TS120, TS130, TS430, TS440, TS830, TS870, TS930, TS940
INRAD-TS950S, TS950SD, TS950SDX KENWOOD 73,0500MHZ ROOFING FILTER 7,00 Kč Nejsou GES 08902085
INRAD Roofing filtr (modul) 73,0500MHz pro hlavní RX TS950S,TS950SD,TS950SDX Kenwood
MFJ-989D 1500 Watt Anténní tuner - roller, 160-10m 14,00 Kč Nejsou GES 08901040
1500 Watt Anténní tuner 1.8 až 30 MHz
INRAD-FT-1000MP Key Click Mod 525,00 Kč Nejsou GES 08900285
INRAD Modul pro zlepšení klíčování pro TCVR FT1000 MP, MARKV FT1000MP
AL-1200XCE 144,00 Kč Nejsou GES 08900311
PA >1.5kW CW,RTTY(1.8kW PEP)/90Win;3CX1200A7;160-10m;230VAC Model
MFJ-1129 MULTI SVORKOVNICE 3,00 Kč Nejsou GES 08900347
Rozvaděčová De-Luxe multisvorkovnice 12-24VDC, 10výstupů 40Amax., V-metr 0-25V
INRAD-95 KENWOOD 8830kHz 1800Hz SSB TS450, TS570, TS690, TS850, TS950 4,00 Kč Nejsou GES 08900221
INRAD 1800Hz/8830kHz KENWOOD TS450, TS570, TS690, TS850, TS950
INRAD-186 KENWOOD 455kHz 250Hz CW TS850, TS930, TS940, TS950 6,00 Kč Nejsou GES 08900205
INRAD 250Hz/455kHz. KENWOOD TS850, TS930, TS940, TS950
INRAD-475 KENWOOD 8830kHz 4000Hz AM TS850, TS930, TS940, TS950 4,00 Kč Nejsou GES 08900235
INRAD 4000Hz/8830kHz KENWOOD TS850, TS930, TS940, TS950
INRAD-100 KENWOOD 8830kHz 6000Hz AM TS450S, TS690 4,00 Kč Nejsou GES 08900236
INRAD 6000Hz/8830kHz KENWOOD TS450S, TS690
INRAD-186 KENWOOD 455kHz 250Hz CW TS450S, TS690 6,00 Kč Nejsou GES 08900206
INRAD 250Hz/455kHz KENWOOD TS450S, TS690, R2000
INRAD-100 KENWOOD 8830kHz 6000Hz AM TS850, TS950 4,00 Kč Nejsou GES 08900237
INRAD 6000Hz/8830kHz KENWOOD TS850, TS950
INRAD-100 KENWOOD 8830kHz 6000Hz AM TS930, TS940 4,00 Kč Nejsou GES 08900238
INRAD 6000Hz/8830kHz KENWOOD TS930, TS940
INRAD-475 KENWOOD 8830kHz 4000Hz AM TS450S, TS690 4,00 Kč Nejsou GES 08900234
INRAD 4000Hz/8830kHz KENWOOD TS450S, TS690
INRAD-95 KENWOOD 8830kHz 1800Hz SSB R820, R5000, TS120, TS130, TS180, TS430, TS440, TS530, TS820 4,00 Kč Nejsou GES 08901935
INRAD 1800Hz/8830kHz. KENWOOD R820, R5000, TS120, TS130, TS180, TS430, TS440, TS530, TS820
INRAD-701A YAESU 8215kHz 400Hz CW FT920 4,00 Kč Nejsou GES 08900254
INRAD 400Hz/8215kHz YAESU FT920
INRAD-709.1 YAESU 8215kHz 2100Hz SSB FT920 5,00 Kč Nejsou GES 08901739
INRAD 2100Hz/8215kHz YAESU FT920. Přímo nahradí původní OEM 2.4kHz filtr
INRAD-716 YAESU 8215kHz 2800Hz SSB FT920 4,00 Kč Nejsou GES 08901947
INRAD 2800Hz/8215kHz YAESU FT920. Přímo nahradí původní OEM 2.4kHz filtr
INRAD-711 YAESU 8215kHz 1800Hz SSB FT920 4,00 Kč Nejsou GES 08901948
INRAD 1800Hz/8215kHz YAESU FT920. Přímo nahradí původ. OEM 2.4kHz filtr
ARDUINO DUE 1429,00 Kč Nejsou PSE 5505-0282
1 ks 1429,00 Kč
A microcontroller board based on the 32-bit Atmel SAM3X8E ARM Cortex-M3 CPU., Rozhraní:, CAN, SPI, TWI, UART, USART, USB OTG, Druh konektoru:, ICSP, USB B micro x2, kolíková zásuvka, napájecí
ARDUINO MEGA2560 REV3 1175,00 Kč Nejsou PSE 5505-0283
1 ks 1175,00 Kč
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560., Rozhraní:, SPI, TWI, UART, Druh konektoru:, ICSP, USB B, kolíková zásuvka, napájecí
BUNDLEBAR - MINI LED PAR BATTE.. 7432,00 Kč Nejsou PSE 6000-387
1 ks 7432,00 Kč
BUNDLEBAR is an all-in-one wash lighting solution designed for mobile entertainers. It produces a full spectrum of light with smooth colour mixing using chip-on-board (COB) technology. Including a tripod, foot switch and carrying bags, it is very easy to set up. Flicker-free video operation with high-frequency LED dimming. Very easy solution for mobile shows as it is easy to control via DMX, stand-alone or the included foot switch., Features, small wash lighting solution designed for mobile entertainers, smooth output makes these lights perfect for front light applications, suitable for recording (400 Hz), built-in dimmer curves offer smooth LED fading, DMX control via 3 or 15 channels for simple or advanced controlling, 3-channel mode: RGB, 15-channel mode: mode, dimmer, shutter, RGB control (separate for each spot), built-in programs with speed adjustment, sound activated pre-programmed effects, including:, stand (height: 2.15 m) with carrying bag, foot switch with cable, Specifications, power supply: 100-240 V~ 50/60 Hz, power consumption: 50 W, LEDs: 12 x 9 W tri-colour RGB COB LEDs, output:, red: 620 nm/100 lm, green: 520 nm/100 lm, blue: 462 nm/50 lm, beam angle: 15°, DMX control: 3 or 15 ch, dimensions: 910 x 242 x 48 mm, weight: 10 kg, cos &phi,: 0.51, fuse: T1A 250 V, temperature:, t, : 70 °C, t, : 40 °C, power factor: test, https://youtu.be/qxGDlPctLP4
DMX EFFECT FAN 11358,00 Kč Nejsou PSE 6000-369
1 ks 11358,00 Kč
Mini full option stage and touring fan, with DMX and timer control., Features, wind machine with DMX interface and built-in LCD display for stage and touring, applications, compact metal enclosure with brackets for road use, great effect when used with fog, snow, bubble machines, etc., air discharge angle adjustable, low power consumption, Specifications, power supply: 230 VAC 50/60 Hz, power consumption: 125 W 0.56 A, airflow: 30 m3/min, control: built-in LCD on board controller, speed: 2500 rpm, DMX512: one channel 3-PIN, dimensions: 509 x 122 x 443 mm, weight: 9.5 kg
EDU10 - USB PIC PROGRAMÁTOR 2106,00 Kč Nejsou PSE 5503-410
1 ks 2106,00 Kč
Stavebnice USB PIC PROGRAMMER AND TUTOR BOARD, Stavebnici dodáváme pouze na objednávku, návod pouze v Anglickém jazyce, Want to set the first steps into Microchip PIC programming?, This board is all you need!, The tutor can help to get you started into the magic world of PIC programming., Later it can also be used for more advanced programming., Use the free tools from Microchip, the PICKit2 programmer tool and the MPLAP IDE environment., Features, PICKit2 compatible programmer, includes: PIC16F882, tutor sample programs in C and Assembler can be downloaded:, button input reading, LED on/off, LED blinking, buzzer and display driving, LED brightness, analog value reading, read up to 4 push buttons for digital in simulation, light up to 4 LEDs for digital out simulation, read the value of a potentiometer (analog value), read the value of a temperature dependent resistor (NTC), read the value of a light dependent resistor (LDR), dim a white LED using PWM signal, learn how to drive a LED digit, learn how to drive a buzzer, Specifications, experiment module can be powered via USB, power output to target is supported, indicator LEDs for power supply and programming mode, dimensions:, programming and learning module: 90 x 74 mm, programmer only: 34 x 74 mm, Extras, The boards can easily be separated, for independent programmer use., An external supply connector for the tutor board is provided., All PIC micro controllers that are programmable using the Microchip PICKIT2 programmer, can also be programmed using the EDU10. You can find the list in the MPLAB software package.
ESP8266DB modul WiFi 409,00 Kč Nejsou PSE 5502-608
1 ks 409,00 Kč
Modul WiFi, This Wi-Fi module, which is based on the ESP8266, is compatible with every open source platform, such as Raspberry, Arduino, Banana Pi and CubieBoard, and is equipped with a range of useful functions., Specifications, ESP8266 Wi-Fi module, Programmable Wi-Fi microcontroller, Communication and programming by means of UART and SPI interface, 32-bit Xtensa LX106 processor core, Integrated Wi-Fi: IEEE 802.11b/g/n, Wi-Fi Direct (P2P), SoftAP, Integrated TCP/IP protocol stack, Includes built-in temperature sensor, Shutdown leakage current, Standby power consumption, Wake-up time until first sent data packet, Max. range depending on environment: 100 - 250 m, Integrated PCB Wi-Fi antenna, Up to +19.5 mdBM wireless output power in 802.11b mode, Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, Arduino, Banana Pi, CubieBoard, Dimensions (W x H x D): 25 x 15 x 12 mm
K8095 MP3 PŘEHRÁVAČ 1405,00 Kč Nejsou PSE 5503-395
1 ks 1405,00 Kč
Stavebnice MP3 přehrávače., (Lze zakoupit i jako hotový modul VM8095.), Konečně je možné si sestavit vlastní MP3 přehrávač!, Vytvořte si vlastní domácí audio systém, jukebox, jingle player, audio zprávy, zvukové efekty, … MP3, kde chcete a jak to chcete!, Vlastnosti, * podporuje SD karty, * high-quality VLSI decoder, * 5 tlačítek přednastavených oddílů, * play-pause, next, previous, search, * ovládání hlasitosti, * random a shuffle, * 8 různých přednastavených zvukových režimů, * 6 přehrávacích režimů: vše, složka, při zapnutí..., * infrared přijímač, * on-board power amplifier, * RCA pre out, * výstup na sluchátka a repro, * mono provoz je možný, * je možná vertikální nebo horizontální pozice SD karty, * možno doobjednat:, o LCD: PC1602WRS-KWA-E, o RF receiver modul: RX433N, o napáječ: PS1210, o RF dálkové ovládání: pro EU a US, + 8-kanálový RF vysílač: VM118R (sestavený), + 8-kanálový RF vysílač: K8058 (stavebnice), o RF dálkové ovládání: pouze pro EU, + 4-kanálový stolní vysílač: VM160DT, + 4-kanálový vysílač: VM160T, o IR ovladač:, + 15-kanálový IR vysílač: K8049 (stavebnice), Technické údaje, * pracuje s SD a SDHC kartami, * testováno až po 32GB karty, * podporuje ID3 TAGy: Titul, Artist Name, Album Name a rok se zobrazuje na (volitelném) 2-řádkovém 16 znak. LCD, * podporuje složky do jedné úrovně hloubky, * až 1024 složek, každá může obsahovat až 16384 písní, * nastavení equalizeru: Flat , Loudness, Heavy, Clear, Soft, Disco, Live a Hall, * dekóduje MP3 (MPEG 1.0 & 2.0 audio layer III (CBR, VBR, ABR), Till 320kbit/s. Fraunhofer IIS a Thomson licencováno, * zesilovač: 2x 5Wrms @ 4ohm, * napájení: 12Vdc/1A, * rozměry: 130 x 99mm / 5.11 x 3.9"
K8096 - 1 CHANNEL USB STEPPER .. 1271,00 Kč Nejsou PSE 5503-423
1 ks 1271,00 Kč
Stavebnice 1 CHANNEL USB STEPPER MOTOR CARD, While the motor turns you can simultaneously check the status of the dry-inputs (ex. emergency stop signal, limit detection...)., Use the switch inputs to test the motor., Can be used in every application where positioning is needed, (for example, plotter, printer, valves, automations …)., Features, capable of driving 1 stepper motor, suited for bipolar motors, current of the motor can be adjusted (trimmer), over current protection sensing, onboard switch mode supply, USB connection: control the motor using your computer, DLL file supplied to write your own software, includes board-to-wire connections, Specifications, power output: 750 mA continuous, (1 A peak), wide range AC - power input: 5 ... 30 V, 5 dry-contact inputs, 1 logic open collector output, power supply: 10 ... 30 VAC, dimensions: 117 x 65.5 x 25 mm
K8097 - 4 CHANNEL USB STEPPER .. 2012,00 Kč Nejsou PSE 5503-424
1 ks 2012,00 Kč
Stavebnice 4 CHANNEL USB STEPPER MOTOR CARD, USB controlled stepper motor card, to drive 4 stepper motors., While the motor turns you can simultaneously check the status of the dry-inputs (ex. emergency stop signal, limit detection...)., Use the switch inputs to test the motors., Can be used in every application where positioning is needed, (for example, plotter, printer, valves, automations …)., Features, capable of driving 4 independent stepper motors, suited for bipolar motors, current can be adjusted for each motor independently (trimmer), over current protection sensing, onboard switch mode supply, USB connection: control the motors using your computer, DLL file supplied to write your own software, includes board to wire connections, Specifications, power output per motor: 750mA continuous, ( 1A peak), wide range AC - power input: 5 ... 30V, 6 dry-contact inputs, 1 logic open collector output, power supply: 10 ... 30VAC, dimensions: 140 x 100 x 30mm
K8101 - USB MESSAGE BOARD 1577,00 Kč Nejsou PSE 5503-425
1 ks 1577,00 Kč
Stavebnice USB MESSAGE BOARD, Add another screen to your computer that shows the information you want!, Even if your main screen is off., Features, 4 downloadable example programs with source code supplied, Twitter Display: displays the incoming feeds, Mail Display: shows incoming mail subjects, Drive Display: shows info of your HDD, Eyes Display: mouse movement and click animation, DLL supplied to easily code your own applications (VB.net - C#), 1 Button with 2 programmable functions (short & long press), Equipped with a buzzer that can be configured through software, A test program (with source code) can also be downloaded to test all functions of the kit (button, backlight, buzzer, LCD draw routines), Available commands:, Send images to the display (.BMP 128x64), Draw or erase pixels, Draw or erase a square, Draw or erase a line, Activate the buzzer by sending a beep amount (0-255), Activate the backlight by sending an ON-time (0-254 sec / 255 = always on), Send small or big text, Change the contrast, Invert the display, Clear everything but the background image, Clear everything, Do something on a short button press, Do something on a long button press, Specifications, LED - Backlight (white), LCD resolution: 128 x 64 pixels, USB powered, Max. power consumption: 35 mA, dimensions: 77.5 x 60.5 x 38 mm
K8110 THE TREMOR - TREMOLO GUI.. 1730,00 Kč Nejsou PSE 5503-486
1 ks 1730,00 Kč
STAVEBNICE THE TREMOR - OPTICAL TREMOLO GUITAR EFFECT PEDAL, Build, tweak, plug & play!, Assemble this analog guitar effect pedal and tweak it to create the exclusive sound you want. The Tremor guitar pedal not only allows you to control the level, depth and velocity but also enables you to adjust the hardness of your waveform. Its solid case and heavy duty footswitch makes it a perfect addition to your pedal board., Check out its other features below and find out how to play your guitar in your unique way., Features:, controls: level, depth, velocity, hard/smooth (square/ triangle waveform) and, true bypass heavy duty footswitch, tremolo LED (white) indicator, power/battery LED (blue) indicator, high quality Neutrik 6.35 mm audio connectors, full die-cast case: rock solid, battery or adapter operated (adapter and battery not included), double buffered audio circuit, shuts down when no cables are connected, Specifications:, dimensions: 115 x 65 x 25 mm, operating voltage: 9 V battery type 6LR61 (not incl.)
K8111 EXTRADRIVE GUITAR EFFECT.. 1791,00 Kč Nejsou PSE 5503-484
1 ks 1791,00 Kč
STAVEBNICE EXTRADRIVE - (A)SYMMETRIC OVERDRIVE GUITAR EFFECT PEDAL, Build, tweak, plug & play!, Assemble this analog guitar effect pedal and tweak it to create the exclusive sound you want. The Extradrive guitar pedal not only allows you to control the level, tune and drive but also enables you to adjust the symmetry of your distortion. Its solid case and heavy duty footswitch makes it a perfect addition to your pedal board., Check out its other features below and find out how to play your guitar in your unique way., Features:, controls: level, tone, drive, symmetric/asymmetric/semi asymmetric (distortion) and, true bypass heavy duty footswitch, power/battery LED (blue) indicator, high quality Neutrik 6.35 mm audio connectors, full die-cast case: rock solid, battery or adapter operated (adapter and battery not included), double buffered audio circuit, shuts down when no cables are connected, Specifications:, dimensions: 115 x 65 x 25 mm, operating voltage: 9 V battery type 6LR61 (not incl.)
K8400 VERTEX 3D PRINTER 20073,00 Kč Nejsou PSE 5503-427
1 ks 20073,00 Kč
Stavebnice VERTEX 3D PRINTER, Visit our VERTEX 3D PRINTER website: www.vertex3dprinter.eu, The Vertex is the next generation Velleman 3D printer kit., Easy, accurate, affordable & Open Source., Optional: Second nozzle for Vertex 3D Printer K8402, Now available: A 10-pc toolset to help you build the Vertex 3D Printer VTSET8400, Specifications, Printing:, Print technology: Fused Filament Fabrication (FFF), Layer resolution: standard: 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm), Build plate: 215 x 240 mm, Build volume: 180 x 200 x 190 mm, Print speed: 30 mm/s - 120 mm/s, Travel speed: 30 mm/s - 300 mm/s, Build plate surface: Removable layer of BuildTak, (consumable, also sold separately), Filament diameter: 1.75 mm (accepts all filament spools with a mounting hole = 53 mm)., Open filament policy., Prints: PLA, ABS, Testing with other materials in progress., Nozzle 1&2 diameter: 0.35mm, One nozzle supplied. Second nozzle optional., Distance between nozzles: 23.7 mm, Maximum nozzle operating temperature: 270 °C, Software:, Firmware: Modified Open Source Marlin 3D Printer, Firmware - user upgradable, Software: Repetier - CuraEngine - Slic3r, (RepRap compatible), Hardware:, Dimensions: X Y Z 360 - 380 - 395 mm, (without filament spools), Frame: Polycarbonate panels and fibre reinforced molded ABS parts, Electrical:, Communication: USB 2.0 or SD card, Controller board: AVR ATmega2560 based, Dual head and heated bed capable, Display: 4 x 20 char. blue LCD with white backlight, AC input: 100 - 240 VAC 50-60Hz 150W max.
K8402 - SECOND NOZZLE FOR VERT.. 4455,00 Kč Nejsou PSE 5503-428
1 ks 4455,00 Kč
SECOND NOZZLE FOR VERTEX 3D PRINTER, Contains all necessary parts to convert your single extruder Vertex 3D Printer into a dual extruder printer., Features, includes:, 0.35mm extruder assembly, Stepper motor, Plug-in stepper motor driver, All necessary hardware, Extras, Important, At the factory, we have loaded your Vertex 3D Printer controller board with dual extruder firmware., If you would like to use your Vertex 3D Printer as a single extruder printer, you will have to upload single extruder firmware., Vertex 3D printer firmware single head, If you have been using your Vertex 3D Printer as a single extruder printer and you are upgrading to dual extruder, then you will have to upload dual extruder firmware., Vertex 3D printer firmware dual head
K8600 VERTEX NANO 3D PRINTER K.. 9710,00 Kč Nejsou PSE 5503-487
1 ks 9710,00 Kč
Stavebnice VERTEX NANO 3D PRINTER KIT, REVOLUTIONARY 3D PRINTING ON A NANO SIZE, Based on the accuracy and user-friendly character of the first K8400: VERTEX 3D PRINTER , we bring you the Vertex Nano. This smaller version combines the latest technologies to print refined 3D objects of max. 8 x 8 x 7,5 cm in a fast way. Therefore, it is the ideal 3D printer for those of you who want to dip their toe in the world of 3D printing!, 3D PRINTING FOR YOU, The Vertex Nano is Velleman Projects 3rd generation 3D printer. Thanks to our experience, we have managed to keep this new 3D printer accurate and open source but in a compact and affordable design., Check out vertex3dprinter.eu for more info!, Specifications:, printing:, print technology: Fused Filament Fabrication (FFF), layer resolution: standard: 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm), build plate: 80 x 80 mm, build volume: 80 x 80 x 75 mm, build plate surface: Metal plate with BuildTak (consumable, also sold separately), print speed: 40mm/s, travel speed: 70mm/s, filament diameter: 1.75 mm, prints: PLA, ABS (testing with other materials in progress), maximum nozzle operating temperature: 245 °C, nozzle diameter: 0,35mm (single head), software:, firmware: Modified Open Source Marlin 3D Printer. Firmware - user upgradable, software: Repetier - CuraEngine - Slic3r (RepRap compatible), hardware:, dimensions: 230 x 150 x 160 mm, frame: sturdy, metal frame, weight: 2.3 kg, average noise level during operation: 45dB(A), ambient operation temperature: max 25 °C, storage temperature: - 10 °C to + 40 °C, electrical:, communication: an SD card for direct printing and a USB connection for updates, controller board: AVR ATmega2560 based, display: 4 x 20 char. blue LCD with white backlight, AC input: 100-240 VAC, 50/60Hz, LED illuminated logo, https://youtu.be/pVv1E2gD-lA, https://youtu.be/TGuSgsHAH8A
K8800 VERTEX DELTA 3D PRINTER 21850,00 Kč Nejsou PSE 5503-488
1 ks 21850,00 Kč
Stavebnice VERTEX DELTA 3D PRINTER, The Vertex Delta is an all-round and reliable 3D printer designed to print refined objects to complete your projects., Aside from the excellent print quality and user-friendliness, the Vertex Delta also comes with a lot of innovative perks to make your 3D printing experience more engaging and pleasant. Advanced safety features, a filament run out detector, a mid print filament replacement function and automatic calibration and bed compensation are only a few of the latest technological additions., This Vertex comes as a hybrid kit which means that after a straightforward and quick assembly, your Delta 3D printer is ready to serve you. And dont worry about a precise build, because this device will take care of all necessary procedures to ensure a perfect first print., Choose for reliability and for making quality 3D projects, choose Vertex and make it happen!, Go to vertex3dprinter.eu and find out more!, Specifications:, Printing:, print technology: Fused Filament Fabrication (FFF - FDM), layer resolution: standard 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm), large build volume: 200 mm build platform diameter (0/- 5 mm), 225 mm build height (0/+75 mm) (depends on object diameter), print speed: 20-50 mm/s (can go up to 75 mm/s), travel speed: 180-200 mm/s, build plate surface: removable layer of K8800-BT: BUILDTAK 3D PRINT BED SURFACE FOR VERTEX DELTA (K8800) - průměr 210 mm (K8800-BT), filament diameter: 1.75 mm (accepts all filament spools with a mounting hole = 53 mm) - open filament policy, prints: PLA, ABS, TPU, PET and others, nozzle: E3D compatible, nozzle diameter: 0.35 mm (one nozzle supplied), maximum nozzle operating temperature: 295°C, bed compensation: automatic bed compensation performed by the nozzle (no manual calibration needed), calibration: automatic first-time set-up calibration, couplers: backlash free magnetic effector-couplers, advanced safety features: auto shutdown when print head detaches or temperature is incorrect (most unlikely), filament run out detector: automatic pause and reload when printer runs out of filament, change filament function while printing: this means that you can print objects with multiple filaments/colours, effective pause function: pause your print job without nozzle leakage, end stops: infrared based end stops, Software:, firmware: modified Open Source Marlin 3D Printer, firmware is user upgradable, software: custom Repetier version (Windows) - Cura profiles (Mac), Hardware:, dimensions: W 35 x D 35 x H 77 cm (without filament spool), frame: rigid aluminium extrusion risers and 4 mm aluminium top and bottom plates for a sturdy frame and precision ground 100 mm vertical rods and brass bushings, fully Open-Source (hard- and software), weight: 10 kg, ambient operating temperature: max. 30°C, storage temperature: -10°C to +50°C, hybrid kit: quick and straightforward build, no soldering required, Electrical:, communication: SD card or USB 2.0 (automatic SD card recognition), controller board: AVR ATmega2560 based, AC input: 100 - 240 VAC 50-60 Hz 90 W max., display: 128 x 64 px graphic display with blue backlight, Extras:, All specifications and features are subject to change., https://youtu.be/FtF3quCa2Uo, />
KA0 VELLEMAN NIBBLE KIT 962,00 Kč Nejsou PSE 5505-127
1 ks 962,00 Kč
VELLEMAN NIBBLE KIT, Build your own - fully Arduino compatible - microcontroller and enhance it with 4 built-in buttons and blue LEDs. The nibble only requires through hole soldering skills and is preprogrammed with a working memory game (SMD components are already assembled)., The Velleman Nibble is also available as a module - KA0: VELLEMAN NIBBLE KIT, Features, fully Arduino compatible, assembled SMD components, 4 on-board push buttons, 4 on-board LEDs, preprogrammed with working memory game
MK195 VOICE RECORDING/PLAYBACK.. 516,00 Kč Nejsou PSE 5503-429
1 ks 516,00 Kč
STAVEBNICE VOICE RECORDING/PLAYBACK MODULE, Features, recording time between 30 and 90 s (adjust the sample rate), on-board microphone, speaker O 57 mm included, using the speed adjustment, a funny voice can be created, external open-collector trigger inputs for recording, playback, delete, next, and volume, Specifications, power supply : 9 ... 12 VDC or with a 9 V battery (ex. 6LI61), power consumption:, max. 150mA during playback, max. 6mA during standby!, adjustable sampling rate: 5…12 kHz, speaker output: 500 mW max., 8 ohm, nominal recording time: 60 seconds, PCB dimensions: 77 x 60 x 15 mm
MK196 MULTI VOLTAGE PILOT LED 140,00 Kč Nejsou PSE 5503-475
1 ks 140,00 Kč
STAVEBNICE MULTI VOLTAGE PILOT LED, These ultra small blue led pilot lights fit everywhere and run from almost any power source., Features:, bright blue 3 mm LED, small size, wide voltage range, low power consumption, long life, horizontal or vertical mounting possible, one kit contains two units, applications: pilot light, staircase lighting, guide lighting, orientation lighting, etc., Specifications:, voltage range: 12 - 240 VAC / DC (depending on resistors), board size: 27 x 13 mm, LED current: 0.5 - 2 mA
MSB-1680 nepájivé kontaktní po.. 491,00 Kč Nejsou PSE 5201-1454
1 ks 491,00 Kč
Nepájivé pole 1650 kontaktů se 3-mi napájecími svorkami, Features, base socket : 4 columns of 5 x 64 terminals, bus strip : 8 buses of 50 connected terminals arranged in 4 rows, Specifications, voltage: max. 30 V, current: max. 3 A, material:, external body: ABS with colour printing, internal interconnected clips: stainless steel, base socket: 2, bus strip: 4, tie points: 1680, 14-pins IC capacity: 18, binding post: 3, dimensions:, board: 220 x 150 x 18 mm, breadboard: 174 x 132 mm, weight: 313 g
CON RFM95 26,38 Kč Nejsou SOS 182634
e-shop 0
3 ks 26,38 Kč
5 ks 25,65 Kč
20 ks 23,60 Kč
Načteno
Converter Board RFM95 w/o Pin Header and SMA Connector
Reklama:

Velký dron s HD kamerou Létejte z pohledu pilota pomocí obrazovky mobilu. Foťte a natáčejte úžasná letecká videa a snímky.